language de en

SensoTwin Application Ontology

Release 19.01.2024

This version:: http://w3id.org/sensotwin/applicationontology/1.0.0
Revision:: 1.0.0
Authors:
Imported Ontologies:: prov-o#; prov-o-inverses#; co
Download serialization:
License:
Visualization:
Cite as:: . SensoTwin Application Ontology. Revision: 1.0.0. Retrieved from: http://w3id.org/sensotwin/applicationontology/1.0.0

Provenance of this page

Ontology Specification Draft

Abstract

Usage of Ontologies: PMDCO PMDSI (old) qudt Prov IAO

SensoTwin Application Ontology: Overview back to ToC

This ontology has the following classes and properties.

Cross-reference for SensoTwin Application Ontology classes, object properties and data properties back to ToC

This section provides details for each class and property defined by SensoTwin Application Ontology.

Classes

a sigma ult
Activity
Agent
analysing process
applying release agent
assembling process
Auxiliary Material
b sigma ult
Binder
carbon
check vacuum loss
cleanser
cleansing glass plate
constrain e11
constrain e12
constrain e13
constrain e21
constrain e22
constrain e23
constrain e31
constrain e32
constrain e33
cubic
Curing Process
Curingprocess with constant Temperature
Curingprocess with decreasing Temperature
Curingprocess with increasing temperature
cut fibre
cut gersterband
cut peel ply
cut resin distribution media
cut vacuum film
Cutting specimen process
Cylic Tensile Test
data resource
degase matrix
Degasing Node
degasing process
Demolding Node
demolding process
dilatometer
dimensions
dist edges
dist fibre
dist fibre max
DSC
duration
Dynamic Mechanic Analysis
e11
e12
e13
e21
e22
e23
e31
e32
e33
end temperature
end time
endless fibre
endless fibre reinforced material
Entity
evaluation mode
exact pressure
ExactTemperature
f v c
fibre composite
fibre length
fibre material
Finaler Prozess
fix origin
fixate vacuum film
Fixating glueplatetool process
Flashtape
furnace
gerster band
glass
Glue
glue tacky tape
GlueHardener
Glueing flashtape process
Glueing glueplate on plate process
GluePlate
GlueRatio
hardener to resin ratio
header field
hight
homogenised stress strain response
increase pressure
Infiltration Node
infiltration process
Initialer Prozess
initiator
interfacesize
laboratory
layer fibre
layer peel ply
layer resin distribution media
Leakage Test Node
leakage test process
length
LongFibre
m p c 1
m p c 2
m p c 3
MachineSetting
macro scale
manner of break
manufacturer
manufacturing process
material
material data microscale simulation
matrix
matrix hardener
matrix material
max attempts
max iter
maximal pressure
MaximalTemperature
Mensch
meshsizefrac
meso scale
micro scale
minimal pressure
MinimalTemperature
mix matrix
mixed material
Mixing glue process
mode
mode draw vacuum
mode gas ballast
mu e
mu fibre
n fibre
nopopup
norn
number
Object
operator
organization
output tensile test
p b c algorithm
p t f e hose
peel ply
person
place p t f e hose
Placing Plate Process
Placing spacer process
Plate Production Processing Node
plot r v e
poisson's ratio
prepare p t f e hose
Preparing glue plate process
Preparing specimen process
pressure
pressure difference
process
Process Node
Production Machine
profile form
ratio
raw material
Reduce vacuum mode
refmeshsizefrac
release agent
resin
resin distribution media
Resource
rheometer
run evaluation
run simulation
run vacuum pump
Sanding process
Sandpaper
scale classification
scaling
short fibre
sigma e
sigma fibre
simulation node
simulation parameter
simulation process
software agent
Specimen Preparing Node
start temperature
start time
Static Tensile Test
step1
step2
step3
step4
step5
step6
step7
strain
strain at u t s
Strength
stress
tacky tape
TechnicalDataSheet
temperature
temperature difference
Tensile Test
testklasse
time
ult. tensile strength
universal testing machine
vacuum film
vacuum machine mode
vacuum pump
Vacuum Pump Mode
Value Object
virtual structural material test
virtual structural material test process
waiting time
weight
width
young's modulus

a sigma ult^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#A_sigma_ult

has super-classes: endless fibre reinforced material ^c
has members: a sigma ult ⁿⁱ
is disjoint with: b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

Activity^c back to ToC or Class ToC

IRI: http://www.w3.org/ns/prov#Activity

has sub-classes: process ^c

Agent^c back to ToC or Class ToC

IRI: http://www.w3.org/ns/prov#Agent

An agent is something that bears some form of responsibility for an activity taking place, for the existence of an entity, or for another agent's activity.

has sub-classes: organization ^c, person ^c, software agent ^c

analysing process^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/AnalysingProcess

has super-classes: process ^c
has sub-classes: Preparing specimen process ^c

applying release agent^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ApplyingReleaseAgent

has super-classes: assembling process ^c
has members: __ApplyingReleaseAgent ⁿⁱ
is disjoint with: cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

assembling process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#AssemblingProcess

has super-classes: assembling process ^c, manufacturing process ^c
has sub-classes: applying release agent ^c, cleansing glass plate ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c
has members: assembling process ⁿⁱ
is disjoint with: leakage test process ^c

Auxiliary Material^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#AuxiliaryMaterials

has super-classes: material ^c, meso scale ^c
has sub-classes: Binder ^c, Flashtape ^c, GlueHardener ^c, GluePlate ^c, Sandpaper ^c, cleanser ^c, gerster band ^c, p t f e hose ^c, peel ply ^c, release agent ^c, resin distribution media ^c, tacky tape ^c, vacuum film ^c

b sigma ult^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#B_sigma_ult

has super-classes: endless fibre reinforced material ^c
has members: b sigma ult ⁿⁱ
is disjoint with: a sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

Binder^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Binder

has super-classes: Auxiliary Material ^c
has members: __UHUPlusEndfest300Binder ⁿⁱ

carbon^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Carbon

has super-classes: fibre material ^c
has members: LongFibre ⁿⁱ
is disjoint with: glass ^c

check vacuum loss^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CheckVacuumLoss

has super-classes: leakage test process ^c
has members: check for vacuum loss ⁿⁱ
is disjoint with: run vacuum pump ^c

cleanser^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Cleanser

has super-classes: Auxiliary Material ^c
has members: cleanser ⁿⁱ
is disjoint with: p t f e hose ^c, peel ply ^c, release agent ^c, resin distribution media ^c, tacky tape ^c, vacuum film ^c

cleansing glass plate^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CleansingGlassPlate

has super-classes: assembling process ^c
has members: __CleansingGlassPlate ⁿⁱ
is disjoint with: applying release agent ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

constrain e11^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e11

has super-classes: endless fibre reinforced material ^c
has members: constrain e11 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e12^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e12

has super-classes: endless fibre reinforced material ^c
has members: constrain e12 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e13^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e13

has super-classes: endless fibre reinforced material ^c
has members: constrain e13 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e21^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e21

has super-classes: endless fibre reinforced material ^c
has members: constrain e21 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e22^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e22

has super-classes: endless fibre reinforced material ^c
has members: constrain e22 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e23^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e23

has super-classes: endless fibre reinforced material ^c
has members: constrain e23 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e31^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e31

has super-classes: endless fibre reinforced material ^c
has members: constrain e31 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e32^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e32

has super-classes: endless fibre reinforced material ^c
has members: constrain e32 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

constrain e33^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#constrain_e33

has super-classes: endless fibre reinforced material ^c
has members: constrain e33 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

cubic^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#cubic

has super-classes: endless fibre reinforced material ^c
has members: cubic ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

Curing Process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CuringProcess

has super-classes: Preparing specimen process ^c, heat treatment process ^c, manufacturing process ^c
has sub-classes: Curingprocess with constant Temperature ^c, Curingprocess with decreasing Temperature ^c, Curingprocess with increasing temperature ^c

Curingprocess with constant Temperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CuringWithConstantTemperature

has super-classes: Curing Process ^c
has members: __Curing70°2h ⁿⁱ, curing35° ⁿⁱ, curing70° ⁿⁱ
is disjoint with: Curingprocess with decreasing Temperature ^c, Curingprocess with increasing temperature ^c

Curingprocess with decreasing Temperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CuringWithDecreasingTemperature

has super-classes: Curing Process ^c
is disjoint with: Curingprocess with constant Temperature ^c, Curingprocess with increasing temperature ^c

Curingprocess with increasing temperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CuringWithIncreasingTemperature

has super-classes: Curing Process ^c
has members: curing35 70 ⁿⁱ
is disjoint with: Curingprocess with constant Temperature ^c, Curingprocess with decreasing Temperature ^c

cut fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CutFibre

has super-classes: length changing process ^c
has members: __CutFibre ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

cut gersterband^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CutGersterband

has super-classes: assembling process ^c, length changing process ^c
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

cut peel ply^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CutPeelPly

has super-classes: assembling process ^c, length changing process ^c
has members: cut peel ply ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

cut resin distribution media^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CutResinDistributionMedia

has super-classes: assembling process ^c, length changing process ^c
has members: cut resin distribution media ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

cut vacuum film^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CutVacuumFilm

has super-classes: assembling process ^c, length changing process ^c
has members: cut vacuum film ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

Cutting specimen process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CutSpecimen

has super-classes: Preparing specimen process ^c, length changing process ^c
has members: __CutSpecimen ⁿⁱ

Cylic Tensile Test^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#CyclicTensileTest

A Cyclic Tensile Test is a dynamic testing method where a material / specimen is subjected to repeated tensile loading and unloading cycles. This test assesses the material's fatigue resistance, endurance limit, and behavior under cyclic stresses.

has super-classes: Tensile Test ^c

data resource^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DataResource

A data resource is a file, in which i.e. parameters and measurements are stored

has super-classes: Resource ^c
is in domain of: has data resource serialization ^dp, has header field ^op, has resource location ^dp

degase matrix^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DegaseMatrix

has super-classes: degasing process ^c
has members: degase matrix ⁿⁱ
is disjoint with: mix matrix ^c

Degasing Node^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DegasingNode

has super-classes: Plate Production Processing Node ^c
has members: degasing node ⁿⁱ

degasing process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DegasingProcess

has super-classes: manufacturing process ^c
has sub-classes: degase matrix ^c, mix matrix ^c

Demolding Node^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DemoldingNode

has super-classes: Plate Production Processing Node ^c
has members: demolding node ⁿⁱ

demolding process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DemoldingProcess

has super-classes: demounting process ^c, manufacturing process ^c
has members: demolding a k ⁿⁱ, demolding process ⁿⁱ

dilatometer^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Dilatometer

A dilatometer is a testing machine for measuring the expansion of a sample.

has super-classes: testing machine ^c
is disjoint with: DSC ^c, Dynamic Mechanic Analysis ^c, rheometer ^c, universal testing machine ^c

dimensions^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Dimensions

has super-classes: Value Object ^c
has sub-classes: hight ^c, length ^c, width ^c

dist edges^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#dist_edges

has super-classes: endless fibre reinforced material ^c
has members: dist edges ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

dist fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#dist_fibre

has super-classes: endless fibre reinforced material ^c
has members: dist fibre ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

dist fibre max^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#dist_fibre_max

has super-classes: endless fibre reinforced material ^c
has members: dist fibre max ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

DSC^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DifferentialScanningCalorimeter

The differential scanning calorimeter is a testing machine for carrying out differential scanning calorimetry. The heat flow at phase transitions is measured thermoanalytically as a function of temperature.

has super-classes: testing machine ^c
is disjoint with: dilatometer ^c, Dynamic Mechanic Analysis ^c, rheometer ^c, universal testing machine ^c

duration^c back to ToC or Class ToC

IRI: http://material-digital.de/pmdco/Duration

has super-classes: time ^c
has members: Final Curing Time of Frekote 770-NC ⁿⁱ, __DurationHardenSpecimen ⁿⁱ, degase matrix duration ⁿⁱ, duration ⁿⁱ, durationerster teilvom zyklus ⁿⁱ, durationletzter teil vom zyklus ⁿⁱ, gas ballast duration ⁿⁱ, temperature increase time ⁿⁱ
is disjoint with: end time ^c, start time ^c, waiting time ^c

Dynamic Mechanic Analysis^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DynamicMechanicalAnalysis

The DMA is a testing machine for carrying out a dynamic mechanical analysis in which the test specimen is subjected to a periodically changing load.

has super-classes: testing machine ^c
is disjoint with: DSC ^c, dilatometer ^c, rheometer ^c, universal testing machine ^c

e11^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e11

has super-classes: endless fibre reinforced material ^c
has members: e11 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e12^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e12

has super-classes: endless fibre reinforced material ^c
has members: e12 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e13^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e13

has super-classes: endless fibre reinforced material ^c
has members: e13 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e21^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e21

has super-classes: endless fibre reinforced material ^c
has members: e21 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e22^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e22

has super-classes: endless fibre reinforced material ^c
has members: e22 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e23^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e23

has super-classes: endless fibre reinforced material ^c
has members: e23 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e31^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e31

has super-classes: endless fibre reinforced material ^c
has members: e31 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e32^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e32

has super-classes: endless fibre reinforced material ^c
has members: e32 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

e33^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#e33

has super-classes: endless fibre reinforced material ^c
has members: e33 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

end temperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#EndTemperature

has super-classes: temperature ^c
is disjoint with: start temperature ^c, temperature difference ^c

end time^c back to ToC or Class ToC

IRI: http://material-digital.de/pmdco/EndTime

has super-classes: time ^c
is disjoint with: duration ^c, start time ^c, waiting time ^c

endless fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#EndlessFibre

is equivalent to: (has fibre length ^op some endless fibre ^c) or (has fibre length endless fibre ^dp value true)
has super-classes: fibre length ^c

endless fibre reinforced material^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#EndlessFibreReinforcedMaterial

has super-classes: virtual structural material test ^c
has sub-classes: a sigma ult ^c, b sigma ult ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, f v c ^c, fix origin ^c, interfacesize ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, p b c algorithm ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

Entity^c back to ToC or Class ToC

IRI: http://www.w3.org/ns/prov#Entity

has sub-classes: Object ^c, Process Node ^c, Resource ^c, Value Object ^c, header field ^c, material ^c, norn ^c, profile form ^c, scale classification ^c

evaluation mode^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#evaluation_mode

possible modes: {"11";"12";"13";"22";"23";"33"} should be the same as "mode" in step 4

has super-classes: endless fibre reinforced material ^c
has members: evaluation mode ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

exact pressure^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ExactPressure

has super-classes: pressure ^c
has members: pressure after drawing vacuum ⁿⁱ, pressure after increase ⁿⁱ

ExactTemperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ExactTemperature

has super-classes: temperature ^c

f v c^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#FVC

some float in range [0,1]

has super-classes: endless fibre reinforced material ^c
has members: f v c ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

fibre composite^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#FibreComposite

is equivalent to: composed of ^op some fibre material ^c; composed of ^op some matrix ^c
has super-classes

fibre length^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#FibreLength

is equivalent to: LongFibre ^c or short fibre ^c; has fibre length long fibre ^dp some boolean
has super-classes: raw material ^c
has sub-classes: LongFibre ^c, endless fibre ^c, short fibre ^c
is disjoint with: matrix material ^c

fibre material^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#FibreMaterial

is equivalent to: carbon ^c or glass ^c; has fibre length ^op some fibre length ^c
has super-classes: raw material ^c
has sub-classes: carbon ^c, glass ^c
is disjoint with: matrix material ^c

Finaler Prozess^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#FinalProcess

is equivalent to: process ^c and (has next ^op exactly 0 process ^c)
has super-classes: process ^c

fix origin^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#fix_origin

has super-classes: endless fibre reinforced material ^c
has members: fix origin ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

fixate vacuum film^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#FixateVacuumFilm

has super-classes: assembling process ^c
has members: fixate vacuum film ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

Fixating glueplatetool process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#FixateGluePlateTool

has super-classes: Preparing specimen process ^c
has members: __FixateGluePlateTool ⁿⁱ

Flashtape^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Flashtape

has super-classes: Auxiliary Material ^c
has members: __Flashtape ⁿⁱ

furnace^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/Furnace

has super-classes: Production Machine ^c
has members: Oven ⁿⁱ, exampleoven ⁿⁱ
is disjoint with: vacuum pump ^c

gerster band^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GersterBand

has super-classes: Auxiliary Material ^c
has members: gersterband ⁿⁱ

glass^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Glass

has super-classes: fibre material ^c
is disjoint with: carbon ^c

Glue^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Glue

is equivalent to: (has characteristic ^op some GlueRatio ^c) and (composed of ^op some Binder ^c) and (composed of ^op some GlueHardener ^c)
has super-classes

glue tacky tape^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GlueTackyTape

has super-classes: assembling process ^c
has members: glue tacky tape ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

GlueHardener^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GlueHardener

has super-classes: Auxiliary Material ^c
has members: __UHUPlusEndfest300Hardener ⁿⁱ

Glueing flashtape process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GlueFlashtape

has super-classes: Preparing specimen process ^c
has members: __GlueFlashtape ⁿⁱ

Glueing glueplate on plate process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GlueGluePlateOnPlate

has super-classes: Preparing specimen process ^c
has members: __GlueGluePlateOnSpecimen ⁿⁱ

GluePlate^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GluePlate

has super-classes: Auxiliary Material ^c
has members: __GluePlate ⁿⁱ

GlueRatio^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GlueRatio

has super-classes: ratio ^c
has members: __UHUPlusEndfest300Ratio ⁿⁱ

hardener to resin ratio^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#HardenerToResinRatio

has super-classes: ratio ^c
has members: 1:10 ratio ⁿⁱ, matrixt ratio ⁿⁱ

header field^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#HeaderField

A class bundling the semantics for a specific column in a Data Resource. Provides column number, pointer to attached unit and a human readable description.

has super-classes: Entity ^c
is in range of: has header field ^op

hight^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Hight

has super-classes: dimensions ^c

homogenised stress strain response^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#HomogenisedStressStrainResponse

has super-classes: Value Object ^c
has sub-classes: Strength ^c, strain ^c, stress ^c

increase pressure^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#IncreasePressure

has super-classes: infiltration process ^c
has members: increase pressure ⁿⁱ

Infiltration Node^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#InfiltrationNode

has super-classes: Plate Production Processing Node ^c
has members: infiltration node ⁿⁱ

infiltration process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#InfiltrationProcess

has super-classes: manufacturing process ^c
has sub-classes: increase pressure ^c, run vacuum pump ^c

Initialer Prozess^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#InitialProcess

is equivalent to: has previous ^op exactly 0 process ^c
has super-classes: process ^c

initiator^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/Initiator

has super-classes: person ^c
is disjoint with: operator ^c

interfacesize^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#interfacesize

has super-classes: endless fibre reinforced material ^c
has members: interfacesize ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

laboratory^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/Laboratory

has super-classes: organization ^c
is disjoint with: manufacturer ^c

layer fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#LayerFibre

has super-classes: assembling process ^c
has members: layer fibre ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

layer peel ply^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#LayerPeelPly

has super-classes: assembling process ^c
has members: layer peel ply ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer resin distribution media ^c, place p t f e hose ^c, prepare p t f e hose ^c

layer resin distribution media^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#LayerResinDistributionMedia

has super-classes: assembling process ^c
has members: layer resin distribution media ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, place p t f e hose ^c, prepare p t f e hose ^c

Leakage Test Node^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#LeakageTestNode

has super-classes: Plate Production Processing Node ^c
has members: vacuum pump ⁿⁱ

leakage test process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#LeakageTestProcess

has super-classes: manufacturing process ^c, non transformative analysis process ^c
has sub-classes: check vacuum loss ^c, run vacuum pump ^c
is disjoint with: assembling process ^c

length^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Length

has super-classes: dimensions ^c
has members: length of long fibre ⁿⁱ, length of peel ply ⁿⁱ, length resin distribution media ⁿⁱ, length vacuum foil ⁿⁱ

LongFibre ^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#LongFibre

is equivalent to: (has fibre length ^op some LongFibre ^c) or (has fibre length long fibre ^dp value true)
has super-classes: fibre length ^c
has members: LongFibre ⁿⁱ
is disjoint with: short fibre ^c
is also defined as: named individual

m p c 1^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MPC_1

has super-classes: endless fibre reinforced material ^c
has members: m p c 1 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

m p c 2^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MPC_2

has super-classes: endless fibre reinforced material ^c
has members: m p c 2 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

m p c 3^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MPC_3

has super-classes: endless fibre reinforced material ^c
has members: m p c 3 ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

MachineSetting^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MachineSetting

has super-classes: Value Object ^c
has sub-classes: vacuum machine mode ^c

macro scale^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MacroScale

has super-classes: scale classification ^c
is disjoint with: meso scale ^c, micro scale ^c

manner of break^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MannerOfBreak

has super-classes: output tensile test ^c
has members: manner of break a k v2 90 2 ⁿⁱ
is disjoint with: strain at u t s ^c, ult. tensile strength ^c, poisson's ratio ^c, young's modulus ^c

manufacturer^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/Manufacturer

has super-classes: organization ^c
has members: Loctite ⁿⁱ, manufacturer ⁿⁱ
is disjoint with: laboratory ^c

manufacturing process^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/ManufacturingProcess

has super-classes: process ^c
has sub-classes: Curing Process ^c, assembling process ^c, degasing process ^c, demolding process ^c, infiltration process ^c, leakage test process ^c

material^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Material

has super-classes: Entity ^c
has sub-classes: Auxiliary Material ^c, mixed material ^c, raw material ^c

material data microscale simulation^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MaterialDataMicroscaleSimulation

has super-classes: simulation process ^c

matrix^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Matrix

is equivalent to: composed of ^op some matrix hardener ^c; composed of ^op some resin ^c
has super-classes: mixed material ^c

matrix hardener^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MatrixHardener

has super-classes: matrix material ^c
has members: hardener ⁿⁱ
is disjoint with: resin ^c

matrix material^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MatrixMaterial

has super-classes: raw material ^c
has sub-classes: matrix hardener ^c, resin ^c
is disjoint with: fibre length ^c, fibre material ^c

max attempts^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#max_attempts

has super-classes: endless fibre reinforced material ^c
has members: max attempts ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

max iter^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#max_iter

has super-classes: endless fibre reinforced material ^c
has members: max iter ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

maximal pressure^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MaximalPressure

has super-classes: pressure ^c

MaximalTemperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MaximalTemperature

has super-classes: temperature ^c
has members: Cured Maximal Thermal Stability of Frekote 770-NC ⁿⁱ, Maximal Application Temperature of Frekote 770-NC ⁿⁱ

Mensch^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Human

has super-classes: Process Node ^c
has sub-classes: Plate Production Processing Node ^c, Specimen Preparing Node ^c
has members: __AssemblyNode ⁿⁱ

meshsizefrac^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#meshsizefrac

has super-classes: endless fibre reinforced material ^c
has members: meshsizefrac ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

meso scale^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MesoScale

has super-classes: scale classification ^c
has sub-classes: Auxiliary Material ^c, mixed material ^c
is disjoint with: macro scale ^c, micro scale ^c

micro scale^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MicroScale

has super-classes: scale classification ^c
has sub-classes: raw material ^c
is disjoint with: macro scale ^c, meso scale ^c

minimal pressure^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MinimalPressure

has super-classes: pressure ^c

MinimalTemperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MinimalTemperature

has super-classes: temperature ^c
has members: __Minimal Application Temperature of Frekote 770-NC ⁿⁱ

mix matrix^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MixMatrix

has super-classes: degasing process ^c
has members: mix matrix ⁿⁱ
is disjoint with: degase matrix ^c

mixed material^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MixedMaterial

has super-classes: engineered material ^c, material ^c, meso scale ^c
has sub-classes: matrix ^c

Mixing glue process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#MixGlue

has super-classes: Preparing specimen process ^c
has members: __MixGlueUHU ⁿⁱ

mode^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#mode

has super-classes: endless fibre reinforced material ^c
has members: mode ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

mode draw vacuum^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#DrawVacuum

In this mode, the vacuum pump draws a vacuum, usually controlled and until a specific pressure is reached.

has super-classes: Vacuum Pump Mode ^c
is disjoint with: mode gas ballast ^c, Reduce vacuum mode ^c

mode gas ballast^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#GasBallast

Gas ballast is a mode to prevent condensation inside the pumpt. Small amounts of gas are mixed by, to to dilute vapor.

has super-classes: Vacuum Pump Mode ^c
is disjoint with: mode draw vacuum ^c, Reduce vacuum mode ^c

mu e^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#mu_E

has super-classes: endless fibre reinforced material ^c
has members: mu e ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

mu fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#mu_fibre

has super-classes: endless fibre reinforced material ^c
has members: mu fibre ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

n fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#n_fibre

has super-classes: endless fibre reinforced material ^c
has members: n fibre ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

nopopup^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#nopopup

has super-classes: endless fibre reinforced material ^c
has members: nopopup ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

norn^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Norn

has super-classes: Entity ^c
has members: a s t m d 3039 ⁿⁱ, a s t m d 638 geometry type1 ⁿⁱ, a s t m d 695 ⁿⁱ, a s t m d 7078 ⁿⁱ

number^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Number

has super-classes: Value Object ^c
has members: number of layers ⁿⁱ

Object^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/Object

has super-classes: Entity ^c

operator^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/Operator

has super-classes: person ^c
is disjoint with: initiator ^c

organization^c back to ToC or Class ToC

IRI: http://www.w3.org/ns/prov#Organization

An organization is a social or legal institution such as a company, society, etc.

has super-classes: Agent ^c
has sub-classes: laboratory ^c, manufacturer ^c
is disjoint with: person ^c, software agent ^c

output tensile test^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#OutputTensileTest

has super-classes: Value Object ^c
has sub-classes: manner of break ^c, poisson's ratio ^c, strain at u t s ^c, ult. tensile strength ^c, young's modulus ^c

p b c algorithm^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PBC_algorithm

possible values: "PBLCC" or "EasyPBC"

has super-classes: endless fibre reinforced material ^c
has members: p b c algorithm ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

p t f e hose^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PTFEHose

has super-classes: Auxiliary Material ^c
has members: p t f e hose ⁿⁱ
is disjoint with: cleanser ^c, peel ply ^c, release agent ^c, resin distribution media ^c, tacky tape ^c, vacuum film ^c

peel ply^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PeelPly

has super-classes: Auxiliary Material ^c
has members: peel ply ⁿⁱ
is disjoint with: cleanser ^c, p t f e hose ^c, release agent ^c, resin distribution media ^c, tacky tape ^c, vacuum film ^c

person^c back to ToC or Class ToC

IRI: http://www.w3.org/ns/prov#Person

has super-classes: Agent ^c
has sub-classes: initiator ^c, operator ^c
is disjoint with: organization ^c, software agent ^c

place p t f e hose^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PlacePTFEHose

has super-classes: assembling process ^c
has members: place p t f e hose ⁿⁱ
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, prepare p t f e hose ^c

Placing Plate Process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PlacePlate

has super-classes: Preparing specimen process ^c
has members: __PlacePlate ⁿⁱ

Placing spacer process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PlaceSpacer

has super-classes: Preparing specimen process ^c
has members: __PlaceSpacer ⁿⁱ

Plate Production Processing Node^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PlateProductionProcessNode

has super-classes: Mensch ^c
has sub-classes: Degasing Node ^c, Demolding Node ^c, Infiltration Node ^c, Leakage Test Node ^c
has members: production process ⁿⁱ

plot r v e^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#plotRVE

has super-classes: endless fibre reinforced material ^c
has members: plot r v e ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

poisson's ratio^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Poisson'sRatio

has super-classes: output tensile test ^c
has members: poisson of a k v2 90 2 ⁿⁱ
is disjoint with: manner of break ^c, strain at u t s ^c, ult. tensile strength ^c, young's modulus ^c

prepare p t f e hose^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PreparePTFEHose

has super-classes: assembling process ^c
is disjoint with: applying release agent ^c, cleansing glass plate ^c, cut fibre ^c, cut gersterband ^c, cut peel ply ^c, cut resin distribution media ^c, cut vacuum film ^c, fixate vacuum film ^c, glue tacky tape ^c, layer fibre ^c, layer peel ply ^c, layer resin distribution media ^c, place p t f e hose ^c

Preparing glue plate process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PrepareGluePlate

has super-classes: Preparing specimen process ^c
has members: __PrepareGluePlate ⁿⁱ

Preparing specimen process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PrepareSpecimenProcess

has super-classes: analysing process ^c
has sub-classes: Curing Process ^c, Cutting specimen process ^c, Fixating glueplatetool process ^c, Glueing flashtape process ^c, Glueing glueplate on plate process ^c, Mixing glue process ^c, Placing Plate Process ^c, Placing spacer process ^c, Preparing glue plate process ^c, Sanding process ^c
has members: vorbereitung a k v2 90 2 probe ⁿⁱ

pressure^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Pressure

has super-classes: Value Object ^c
has sub-classes: exact pressure ^c, maximal pressure ^c, minimal pressure ^c, pressure difference ^c
is disjoint with: temperature ^c, time ^c, weight ^c, ratio ^c

pressure difference^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#PressureDifference

has super-classes: pressure ^c
has members: vacuum loss ⁿⁱ

process^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/Process

has super-classes: Activity ^c
has sub-classes: Finaler Prozess ^c, Initialer Prozess ^c, analysing process ^c, manufacturing process ^c, simulation process ^c
is disjoint with: Process Node ^c

Process Node^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/ProcessingNode

has super-classes: Entity ^c
has sub-classes: Mensch ^c, Production Machine ^c, vacuum pump ^c
has members: __DiamondSaw ⁿⁱ, __GluePlateTool ⁿⁱ, __Schlagschere ⁿⁱ, __Spacer ⁿⁱ
is disjoint with: process ^c

Production Machine^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ProductionMachine

has super-classes: Process Node ^c
has sub-classes: furnace ^c

profile form^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ProfileForm

has super-classes: Entity ^c
has members: Profilform NREL 5MW 15p ⁿⁱ

ratio^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Ratio

has super-classes: Value Object ^c
has sub-classes: GlueRatio ^c, hardener to resin ratio ^c
is disjoint with: temperature ^c, time ^c, weight ^c, pressure ^c

raw material^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#RawMaterial

has super-classes: base material ^c, material ^c, micro scale ^c
has sub-classes: fibre length ^c, fibre material ^c, matrix material ^c

Reduce vacuum mode^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ReduceVacuum

In Reduce vacuum mode, the pressure is increased, usually in a controlled manner and up to a specific pressure. (The vacuum is reduced)

has super-classes: Vacuum Pump Mode ^c
is disjoint with: mode draw vacuum ^c, mode gas ballast ^c

refmeshsizefrac^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#refmeshsizefrac

has super-classes: endless fibre reinforced material ^c
has members: refmeshsizefrac ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

release agent^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ReleaseAgent

has super-classes: Auxiliary Material ^c
has members: Frekote 770 NC ⁿⁱ
is disjoint with: cleanser ^c, p t f e hose ^c, peel ply ^c, resin distribution media ^c, tacky tape ^c, vacuum film ^c

resin^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Resin

has super-classes: matrix material ^c
has members: resin ⁿⁱ
is disjoint with: matrix hardener ^c

resin distribution media^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ResinDistributionMedia

has super-classes: Auxiliary Material ^c
has members: resin distribution media ⁿⁱ
is disjoint with: cleanser ^c, p t f e hose ^c, peel ply ^c, release agent ^c, tacky tape ^c, vacuum film ^c

Resource^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Resource

has super-classes: Entity ^c
has sub-classes: TechnicalDataSheet ^c, data resource ^c
is in range of: has characteristic ^op

rheometer^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Rheometer

A rheometer is a testing machine to measure the rheological prperties of a material with shear stress application

has super-classes: testing machine ^c
is disjoint with: DSC ^c, dilatometer ^c, Dynamic Mechanic Analysis ^c, universal testing machine ^c

run evaluation^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#run_evaluation

has super-classes: endless fibre reinforced material ^c
has members: run evaluation ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run simulation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

run simulation^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#run_simulation

has super-classes: endless fibre reinforced material ^c
has members: run simulation ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, scaling ^c, sigma e ^c, sigma fibre ^c

run vacuum pump^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#RunVacuumPump

has super-classes: infiltration process ^c, leakage test process ^c
has members: draw vacuum ⁿⁱ, draw vacuum cast ⁿⁱ, draw vacuum sprue ⁿⁱ, run gas ballast ⁿⁱ
is disjoint with: check vacuum loss ^c

Sanding process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Sand

has super-classes: Preparing specimen process ^c
has members: __Sand ⁿⁱ

Sandpaper^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Sandpaper

has super-classes: Auxiliary Material ^c
has members: __CoarseSandpaper ⁿⁱ

scale classification^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ScaleClassification

Class used for the classification of effects, parameters, properties etc. in scaling levels

is equivalent to: macro scale ^c or meso scale ^c or micro scale ^c
has super-classes: Entity ^c
has sub-classes: macro scale ^c, meso scale ^c, micro scale ^c

scaling^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#scaling

has super-classes: endless fibre reinforced material ^c
has members: scaling ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, sigma e ^c, sigma fibre ^c

short fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#ShortFibre

is equivalent to: (has fibre length ^op some short fibre ^c) or (has fibre length short fibre ^dp value true)
has super-classes: fibre length ^c
has members: short fibre ⁿⁱ
is disjoint with: LongFibre ^c

sigma e^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#sigma_E

has super-classes: endless fibre reinforced material ^c
has members: sigma e ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma fibre ^c

sigma fibre^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#sigma_fibre

has super-classes: endless fibre reinforced material ^c
has members: sigma fibre ⁿⁱ
is disjoint with: a sigma ult ^c, b sigma ult ^c, f v c ^c, m p c 1 ^c, m p c 2 ^c, m p c 3 ^c, p b c algorithm ^c, constrain e11 ^c, constrain e12 ^c, constrain e13 ^c, constrain e21 ^c, constrain e22 ^c, constrain e23 ^c, constrain e31 ^c, constrain e32 ^c, constrain e33 ^c, cubic ^c, dist edges ^c, dist fibre ^c, dist fibre max ^c, e11 ^c, e12 ^c, e13 ^c, e21 ^c, e22 ^c, e23 ^c, e31 ^c, e32 ^c, e33 ^c, evaluation mode ^c, fix origin ^c, interfacesize ^c, max attempts ^c, max iter ^c, meshsizefrac ^c, mode ^c, mu e ^c, mu fibre ^c, n fibre ^c, nopopup ^c, plot r v e ^c, refmeshsizefrac ^c, run evaluation ^c, run simulation ^c, scaling ^c, sigma e ^c

simulation node^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/SimulationNode

has super-classes
has members: simulation of endless fibre reinforced material ⁿⁱ

simulation parameter^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#SimulationParameter

has super-classes: Value Object ^c
has sub-classes: virtual structural material test ^c

simulation process^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/SimulationProcess

has super-classes: process ^c
has sub-classes: material data microscale simulation ^c, virtual structural material test process ^c

software agent^c back to ToC or Class ToC

IRI: http://www.w3.org/ns/prov#SoftwareAgent

has super-classes: Agent ^c
is disjoint with: organization ^c, person ^c

Specimen Preparing Node^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#SpecimenPreparingNode

has super-classes: Mensch ^c
has members: _SpecimenPreparationNode ⁿⁱ

start temperature^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#StartTemperature

has super-classes: temperature ^c
is disjoint with: end temperature ^c, temperature difference ^c

start time^c back to ToC or Class ToC

IRI: http://material-digital.de/pmdco/StartTime

has super-classes: time ^c
is disjoint with: duration ^c, end time ^c, waiting time ^c

Static Tensile Test^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#StaticTensileTest

A Static Tensile Test is a type of tensile test where a constant rate of extension or load is applied to a material specimen until failure. It is designed to measure the material's response to a slowly applied uniaxial tensile force.

has super-classes: Tensile Test ^c
has members: t t a k v2 90 2 ⁿⁱ

step1^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Step1

has super-classes: virtual structural material test process ^c
has members: step1 ⁿⁱ
is disjoint with: step2 ^c, step3 ^c, step4 ^c, step5 ^c, step6 ^c, step7 ^c

step2^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Step2

has super-classes: virtual structural material test process ^c
has members: step2 ⁿⁱ
is disjoint with: step1 ^c, step3 ^c, step4 ^c, step5 ^c, step6 ^c, step7 ^c

step3^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Step3

has super-classes: virtual structural material test process ^c
has members: step3 ⁿⁱ
is disjoint with: step1 ^c, step2 ^c, step4 ^c, step5 ^c, step6 ^c, step7 ^c

step4^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Step4

has super-classes: virtual structural material test process ^c
has members: step4 ⁿⁱ
is disjoint with: step1 ^c, step2 ^c, step3 ^c, step5 ^c, step6 ^c, step7 ^c

step5^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Step5

has super-classes: virtual structural material test process ^c
has members: step5 ⁿⁱ
is disjoint with: step1 ^c, step2 ^c, step3 ^c, step4 ^c, step6 ^c, step7 ^c

step6^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Step6

has super-classes: virtual structural material test process ^c
has members: step6 ⁿⁱ
is disjoint with: step1 ^c, step2 ^c, step3 ^c, step4 ^c, step5 ^c, step7 ^c

step7^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Step7

has super-classes: virtual structural material test process ^c
has members: step7 ⁿⁱ
is disjoint with: step1 ^c, step2 ^c, step3 ^c, step4 ^c, step5 ^c, step6 ^c

strain^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Strain

has super-classes: homogenised stress strain response ^c

strain at u t s^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#StrainAtUTS

has super-classes: output tensile test ^c
has members: strain a k v2 90 2 ⁿⁱ
is disjoint with: manner of break ^c, ult. tensile strength ^c, poisson's ratio ^c, young's modulus ^c

Strength^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Strength

has super-classes: homogenised stress strain response ^c
has members: __SimulationErgebnis ⁿⁱ

stress^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Stress

has super-classes: homogenised stress strain response ^c

tacky tape^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#TackyTape

has super-classes: Auxiliary Material ^c
has members: tacky tape ⁿⁱ
is disjoint with: cleanser ^c, p t f e hose ^c, peel ply ^c, release agent ^c, resin distribution media ^c, vacuum film ^c

TechnicalDataSheet^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#TechnicalDataSheet

has super-classes: Resource ^c
has members: Technichal Data Sheet: Frekote 770 NC ⁿⁱ

temperature^c back to ToC or Class ToC

IRI: http://material-digital.de/pmdco/Temperature

has super-classes: Value Object ^c
has sub-classes: ExactTemperature ^c, MaximalTemperature ^c, MinimalTemperature ^c, end temperature ^c, start temperature ^c, temperature difference ^c
has members: __CuringTemperatureOfSpecimen ⁿⁱ, end termperature ⁿⁱ, start temperature ⁿⁱ, temperature increase diff ⁿⁱ
is disjoint with: time ^c, weight ^c, pressure ^c, ratio ^c

temperature difference^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#TemperatureDifference

has super-classes: temperature ^c
is disjoint with: end temperature ^c, start temperature ^c

Tensile Test^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#TensileTest

A Tensile Test is a mechanical testing process that evaluates the tensile strength of a material. It involves applying a uniaxial force to a test specimen to measure its ability to withstand tension. This test determines material properties such as ultimate tensile strength, yield strength, elongation, and Young's modulus.

has super-classes: mechanical testing process ^c
has sub-classes: Cylic Tensile Test ^c, Static Tensile Test ^c

testklasse^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Testklasse

is equivalent to: composed of ^op some Binder ^c

time^c back to ToC or Class ToC

IRI: http://material-digital.de/pmdco/Time

has super-classes: Value Object ^c
has sub-classes: duration ^c, end time ^c, start time ^c, waiting time ^c
is disjoint with: temperature ^c, weight ^c, pressure ^c, ratio ^c

ult. tensile strength^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Ult.TensileStrength

has super-classes: output tensile test ^c
has members: tensile strength a k v2 90 2 ⁿⁱ
is disjoint with: manner of break ^c, strain at u t s ^c, poisson's ratio ^c, young's modulus ^c

universal testing machine^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#UniversalTestingMachine

Eine Universalprüfmaschine ist eine Testmaschine zur Zug- und Druckprüfung von Materialien.

has super-classes: testing machine ^c
has members: universal prüfmaschine inspekt table100k n ⁿⁱ
is disjoint with: DSC ^c, dilatometer ^c, Dynamic Mechanic Analysis ^c, rheometer ^c

vacuum film^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#VacuumFilm

has super-classes: Auxiliary Material ^c
has members: vacuum film ⁿⁱ
is disjoint with: cleanser ^c, p t f e hose ^c, peel ply ^c, release agent ^c, resin distribution media ^c, tacky tape ^c

vacuum machine mode^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#VacuumMachineMode

has super-classes: MachineSetting ^c
has members: mode draw vacuum ⁿⁱ, mode gas ballast ⁿⁱ, mode reduce vacuum ⁿⁱ

vacuum pump^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#VacuumPump

A Vacuum Pump is a machine that removes gas molecules from a sealed volume to leave behind a partial vacuum.

has super-classes: Process Node ^c
has sub-classes: Vacuum Pump Mode ^c
has members: vacuum pump ⁿⁱ
is disjoint with: furnace ^c

Vacuum Pump Mode^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Modes

Modes of a Vacuum Pump refer to the different operational methods or stages it can use to achieve vacuum.

is equivalent to: mode draw vacuum ^c or mode gas ballast ^c or Reduce vacuum mode ^c
has super-classes: vacuum pump ^c
has sub-classes: Reduce vacuum mode ^c, mode draw vacuum ^c, mode gas ballast ^c

Value Object^c back to ToC or Class ToC

IRI: https://w3id.org/pmd/co/ValueObject

has super-classes: Entity ^c
has sub-classes: MachineSetting ^c, dimensions ^c, homogenised stress strain response ^c, number ^c, output tensile test ^c, pressure ^c, ratio ^c, simulation parameter ^c, temperature ^c, time ^c, weight ^c

virtual structural material test^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#VirtualStructuralMaterialTest

has super-classes: simulation parameter ^c
has sub-classes: endless fibre reinforced material ^c

virtual structural material test process^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#VirtualStructuralMaterialTestProcess

has super-classes: simulation process ^c
has sub-classes: step1 ^c, step2 ^c, step3 ^c, step4 ^c, step5 ^c, step6 ^c, step7 ^c

waiting time^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#WaitingTime

has super-classes: time ^c
has members: waiting time ⁿⁱ
is disjoint with: duration ^c, end time ^c, start time ^c

weight^c back to ToC or Class ToC

IRI: http://material-digital.de/pmdco/Weight

has super-classes: Value Object ^c
has members: weight hardener ⁿⁱ, weight of resin ⁿⁱ
is disjoint with: temperature ^c, time ^c, pressure ^c, ratio ^c

width^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Width

has super-classes: dimensions ^c
has members: __WidthOfSpecimen ⁿⁱ, width of long fibre ⁿⁱ, width of peel ply ⁿⁱ, width resin distribution media ⁿⁱ, width vacuum foil ⁿⁱ

young's modulus^c back to ToC or Class ToC

IRI: http://w3id.org/sensotwin/applicationontology#Young'sModulus

has super-classes: output tensile test ^c
has members: young a k v2 90 2 ⁿⁱ
is disjoint with: manner of break ^c, strain at u t s ^c, ult. tensile strength ^c, poisson's ratio ^c

Object Properties

composed of
composes
executedBy
has characteristic
has fibre length
has final process
has header field
has influence on
has initial process
has Input
has next
has unit
has vacuum loss per minute
hasOutput
hasProperty
is influenced by
is manufacturer of
uses vacuum pump mode

composed of^op back to ToC or Object Property ToC

IRI: https://w3id.org/pmd/co/composedOf

has characteristics: transitive

is inverse of: composes ^op

composes^op back to ToC or Object Property ToC

IRI: https://w3id.org/pmd/co/composes

has characteristics: transitive

is inverse of: composed of ^op

executedBy^op back to ToC or Object Property ToC

IRI: https://w3id.org/pmd/co/executedBy

has super-properties: top object property
is inverse of: executes ^op

has characteristic^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasCharacteristic

Is defined by: https://w3id.org/pmd/co

has super-properties: top object property
has range: Resource ^c

has fibre length^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasFibreLength

has characteristics: functional

has super-properties: top object property

has final process^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasFinalProcess

is inverse of: is final process of ^op

has header field^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasHeaderField

Bieten Namen und/oder eine Beschreibung für jede Überschrift einer Datenressource

has super-properties: top object property
has domain: data resource ^c
has range: header field ^c

has influence on^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasInfluenceOn

is inverse of: is influenced by ^op

has initial process^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasInitialProcess

is inverse of: is initial process of ^op

has Input^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasInput

has characteristics: transitive

has super-properties: top object property

has next^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasNext

has super-properties: top object property
has domain: process ^c or Process Node ^c
has range: process ^c or Process Node ^c
is inverse of: has previous ^op

has unit^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasUnit

has vacuum loss per minute^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasVacuumLossPerMinute

has super-properties: top object property

hasOutput^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasOutput

hasProperty^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasProperty

has super-properties: top object property

is influenced by^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#isInfluencedBy

has super-properties: top object property
is inverse of: has influence on ^op

is manufacturer of^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#isManufacturerOf

has super-properties: top object property

uses vacuum pump mode^op back to ToC or Object Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#usesVacuumPumpMode

has super-properties: top object property

__RemoveTearOffFoil^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#OWLDataProperty_88d26209_4637_4071_bca7_394878794b43

has data resource characteristic^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasDataResourceCharacteristic

has super-properties: top data property
has sub-properties: has data resource serialization ^dp, has resource location ^dp

has data resource serialization^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasDataResourceSerialization

has super-properties: has data resource characteristic ^dp
has domain: data resource ^c
has range: { "CBOR" , "JSON" , "XML" , "YAML" }

has fibre length long fibre^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasFibreLengthLongFibre

has characteristics: functional

has super-properties: top data property
has range: boolean

has fibre length short fibre^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasFibreLengthShortFibre

has range: boolean

has layering direction^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasLayeringDirection

has range: { "0°" , "45°" , "90°" }

has offset sprue and cast^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#HasOffsetSprueAndCast

has range: boolean

has resource location^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasResourceLocation

has super-properties: has data resource characteristic ^dp
has domain: data resource ^c
has range: any u r i

has value^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#hasValue

Is defined by: https://w3id.org/pmd/co

is final process or node^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#isFinalProcessOrNode

has range: boolean

is initial process or node^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#isInitialProcessOrNode

has range: boolean

vacuum pump connected to^dp back to ToC or Data Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#vacuumPumpConnectedTo

has range: { "Cast" , "Sprue" }

Annotation Properties

created
creator
license
p7825
quantity amount
title

created^ap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/created

creator^ap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/elements/1.1/creator

license^ap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/license

p7825^ap back to ToC or Annotation Property ToC

IRI: https://material-digital.de/pmdco/P7825

quantity amount^ap back to ToC or Annotation Property ToC

IRI: http://w3id.org/sensotwin/applicationontology#quantityAmount

title^ap back to ToC or Annotation Property ToC

IRI: http://purl.org/dc/terms/title

Named Individuals

1:10 ratio
__ApplyingReleaseAgent
__AssemblyNode
__Aufbau1
__CleansingGlassPlate
__CoarseSandpaper
__Curing70°2h
__CuringTemperatureOfSpecimen
__CutFibre
__CutSpecimen
__DiamondSaw
__DurationHardenSpecimen
__FixateGluePlateTool
__Flashtape
__GlueFlashtape
__GlueGluePlateOnSpecimen
__GluePlate
__GluePlateTool
__Minimal Application Temperature of Frekote 770-NC
__MixGlueUHU
__PlacePlate
__PlaceSpacer
__PreparedComponent
__PrepareGluePlate
__Sand
__Schlagschere
__SimulationErgebnis
__Spacer
__Specimen
__SpecimenAufbau
__UHUEndfestPlus300
__UHUPlusEndfest300Binder
__UHUPlusEndfest300Hardener
__UHUPlusEndfest300Ratio
__WidthOfGluePlate
__WidthOfSpecimen
_SpecimenPreparationNode
a k v2 90 2
a k v2 90 2 probe
a s t m d 3039
a s t m d 638 geometry type1
a s t m d 695
a s t m d 7078
a sigma ult
assembling process
b sigma ult
check for vacuum loss
cleanser
constrain e11
constrain e12
constrain e13
constrain e21
constrain e22
constrain e23
constrain e31
constrain e32
constrain e33
cubic
Cured Maximal Thermal Stability of Frekote 770-NC
curing35 70
curing35°
curing70°
cut peel ply
cut resin distribution media
cut vacuum film
degase matrix
degase matrix duration
degasing node
demolding a k
demolding node
demolding process
dist edges
dist fibre
dist fibre max
draw vacuum
draw vacuum cast
draw vacuum sprue
duration
durationerster teilvom zyklus
durationletzter teil vom zyklus
e11
e12
e13
e21
e22
e23
e31
e32
e33
end termperature
evaluation mode
exampleoven
f v c
fibre composite
Final Curing Time of Frekote 770-NC
fix origin
fixate vacuum film
Frekote 770 NC
gas ballast duration
gersterband
glue tacky tape
hardener
increase pressure
infiltration node
interfacesize
layer fibre
layer peel ply
layer resin distribution media
length of long fibre
length of peel ply
length resin distribution media
length vacuum foil
Loctite
LongFibre
m p c 1
m p c 2
m p c 3
manner of break a k v2 90 2
manufacturer
matrix
matrixt ratio
max attempts
max iter
Maximal Application Temperature of Frekote 770-NC
megapascal
meshsizefrac
millibar
mix matrix
mode
mode draw vacuum
mode gas ballast
mode reduce vacuum
mu e
mu fibre
n fibre
nopopup
number of layers
Oven
p b c algorithm
p t f e hose
peel ply
place p t f e hose
plot r v e
poisson of a k v2 90 2
pressure after drawing vacuum
pressure after increase
production process
Profilform NREL 5MW 15p
q199
q3495543
refmeshsizefrac
resin
resin distribution media
run evaluation
run gas ballast
run simulation
scaling
short fibre
sigma e
sigma fibre
simulation of endless fibre reinforced material
start temperature
step1
step2
step3
step4
step5
step6
step7
strain a k v2 90 2
t t a k v2 90 2
tacky tape
Technichal Data Sheet: Frekote 770 NC
temperature increase diff
temperature increase time
tensile strength a k v2 90 2
universal prüfmaschine inspekt table100k n
vacuum film
vacuum loss
vacuum pump
vorbereitung a k v2 90 2 probe
waiting time
weight hardener
weight of resin
width of long fibre
width of peel ply
width resin distribution media
width vacuum foil
windradflügel
young a k v2 90 2

1:10 ratioⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__1:10Ratio

This is an exampleratio: 1 part Hardener to 10 parts Resin

belongs to: hardener to resin ratio ^c
has facts: has unit ^op q199

__ApplyingReleaseAgentⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__ApplyingReleaseAgent

belongs to: applying release agent ^c
has facts: has characteristic ^op waiting time; has Input ^op __Aufbau1; has Input ^op Frekote 770 NC; has next ^op __CutFibre; hasOutput ^op __Aufbau1; has number of repeats ^dp "4"^^integer

__AssemblyNodeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Human

belongs to: Mensch ^c
has facts: has final process ^op fixate vacuum film; has initial process ^op __CleansingGlassPlate; has Input ^op cleanser; has next ^op vacuum pump; executes ^op __ApplyingReleaseAgent; executes ^op __CleansingGlassPlate; executes ^op __CutFibre; executes ^op cut peel ply; executes ^op cut resin distribution media; executes ^op cut vacuum film; executes ^op fixate vacuum film; executes ^op glue tacky tape; executes ^op layer fibre; executes ^op layer peel ply; executes ^op place p t f e hose; is final process or node ^dp "false"^^boolean; is initial process or node ^dp "true"^^boolean

__Aufbau1ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Aufbau1

belongs to: component

__CleansingGlassPlateⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CleansingGlassPlate

belongs to: cleansing glass plate ^c
has facts: has Input ^op cleanser; has next ^op __ApplyingReleaseAgent; hasOutput ^op __Aufbau1

__CoarseSandpaperⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CoarseSandpaper

belongs to: Sandpaper ^c

__Curing70°2hⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Curing70°2h

belongs to: Curingprocess with constant Temperature ^c
has facts: has characteristic ^op __CuringTemperatureOfSpecimen; has characteristic ^op __DurationHardenSpecimen; has Input ^op __SpecimenAufbau; has next ^op __CutSpecimen; hasOutput ^op __SpecimenAufbau; executedBy ^op exampleoven

__CuringTemperatureOfSpecimenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CuringTemperatureOfSpecimen

belongs to: temperature ^c
has facts: has unit ^op q25267; has value ^dp "70"^^int

__CutFibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CutFibre

belongs to: cut fibre ^c
has facts: has characteristic ^op length of long fibre; has characteristic ^op width of long fibre; has Input ^op LongFibre; has Input ^op __Aufbau1; has next ^op layer fibre; hasOutput ^op __Aufbau1

__CutSpecimenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CutSpecimen

belongs to: Cutting specimen process ^c
has facts: has characteristic ^op __WidthOfSpecimen; has Input ^op __SpecimenAufbau; hasOutput ^op __Specimen; executedBy ^op __DiamondSaw; is final process or node ^dp "true"^^boolean

__DiamondSawⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DiamondSaw

belongs to: Process Node ^c

__DurationHardenSpecimenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DurationHardenSpecimen

belongs to: duration ^c
has facts: has unit ^op q11574; has value ^dp "7200"^^int

__FixateGluePlateToolⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__FixateGluePlateTool

belongs to: Fixating glueplatetool process ^c
has facts: has Input ^op __SpecimenAufbau; has next ^op curing70°; hasOutput ^op __SpecimenAufbau; executedBy ^op __GluePlateTool

__Flashtapeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Flashtape

belongs to: Flashtape ^c

__GlueFlashtapeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__GlueFlashtape

belongs to: Glueing flashtape process ^c
has facts: has Input ^op component; has Input ^op __Flashtape; has next ^op __PlacePlate; hasOutput ^op __PreparedComponent; executedBy ^op examplehuman

__GlueGluePlateOnSpecimenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__GlueGluePlateOnSpecimen

belongs to: Glueing glueplate on plate process ^c
has facts: has Input ^op __GluePlate; has Input ^op __SpecimenAufbau; has Input ^op __UHUEndfestPlus300; has next ^op __PlaceSpacer; hasOutput ^op __SpecimenAufbau; executedBy ^op examplehuman

__GluePlateⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__GluePlate

belongs to: GluePlate ^c
has facts: has layering direction ^dp "45°"

__GluePlateToolⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__GluePlateTool

belongs to: Process Node ^c

__Minimal Application Temperature of Frekote 770-NCⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Minimal_Application_Temperature_of_Frekote_770-NC

belongs to: MinimalTemperature ^c
has facts: has unit ^op q25267

__MixGlueUHUⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__MixGlueUHU

belongs to: Mixing glue process ^c
has facts: has characteristic ^op __UHUPlusEndfest300Ratio; has Input ^op __UHUPlusEndfest300Binder; has next ^op __GlueGluePlateOnSpecimen; hasOutput ^op __UHUEndfestPlus300; hasOutput ^op __UHUPlusEndfest300Hardener; executedBy ^op examplehuman

__PlacePlateⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PlacePlate

belongs to: Placing Plate Process ^c
has facts: has Input ^op __PreparedComponent; has next ^op __MixGlueUHU; hasOutput ^op __SpecimenAufbau; executedBy ^op __GluePlateTool

__PlaceSpacerⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PlaceSpacer

belongs to: Placing spacer process ^c
has facts: has Input ^op __Spacer; has Input ^op __SpecimenAufbau; has next ^op __FixateGluePlateTool; hasOutput ^op __SpecimenAufbau; executedBy ^op examplehuman

__PreparedComponentⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PreparedComponent

__PrepareGluePlateⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PrepareGluePlate

belongs to: Preparing glue plate process ^c
has facts: has characteristic ^op __WidthOfGluePlate; has next ^op __Sand; executedBy ^op __Schlagschere; __RemoveTearOffFoil ^dp "true"^^boolean

__Sandⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Sand

belongs to: Sanding process ^c
has facts: has next ^op __GlueFlashtape; executedBy ^op __CoarseSandpaper

__Schlagschereⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Schlagschere

belongs to: Process Node ^c

__SimulationErgebnisⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__SimulationErgebnis

belongs to: Strength ^c
has facts: has unit ^op q21062777; has value ^dp "496.67825"^^float

__Spacerⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Spacer

belongs to: Process Node ^c

__Specimenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Specimen

belongs to: component
has facts: has characteristic ^op length of long fibre; has characteristic ^op __WidthOfSpecimen

__SpecimenAufbauⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__SpecimenAufbau

belongs to: component

__UHUEndfestPlus300ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__UHUEndfestPlus300

has facts: has characteristic ^op __UHUPlusEndfest300Ratio; composed of ^op __UHUPlusEndfest300Binder; composed of ^op __UHUPlusEndfest300Hardener

__UHUPlusEndfest300Binderⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__UHUPlusEndfest300Binder

belongs to: Binder ^c

__UHUPlusEndfest300Hardenerⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__UHUPlusEndfest300Hardener

belongs to: GlueHardener ^c

__UHUPlusEndfest300Ratioⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__UHUPlusEndfest300Ratio

belongs to: GlueRatio ^c
has facts: has value ^dp "1:1 Binder:Hardener Ratio"

__WidthOfGluePlateⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WidthOfGluePlate

has facts: has unit ^op q174789; has value ^dp "55"^^int

__WidthOfSpecimenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WidthOfSpecimen

belongs to: width ^c

_SpecimenPreparationNodeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__SpecimenPreparationNode

belongs to: Specimen Preparing Node ^c
has facts: has final process ^op __CutSpecimen; has initial process ^op __PrepareGluePlate

a k v2 90 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__AK_V2_90_2

belongs to: component
has facts: has characteristic ^op a s t m d 3039

a k v2 90 2 probeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__AK_V2_90_2Probe

belongs to: component

a s t m d 3039ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#ASTM_D_3039

Norm Composite Quasistatischer Zugversuch

belongs to: norn ^c

a s t m d 638 geometry type1ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#ASTM_D_638_GeometryType1

belongs to: norn ^c

a s t m d 695ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#ASTM_D_695

belongs to: norn ^c

a s t m d 7078ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#ASTM_D_7078

belongs to: norn ^c

a sigma ultⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__A_sigma_ult

belongs to: a sigma ult ^c
has facts: has value ^dp "2000.0"^^float

assembling processⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__AssemblingProcess

belongs to: assembling process ^c

b sigma ultⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__B_sigma_ult

belongs to: b sigma ult ^c
has facts: has value ^dp "6.0"^^float

check for vacuum lossⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CheckForVacuumLoss

belongs to: check vacuum loss ^c
has facts: has next ^op mix matrix; has vacuum loss per minute ^op vacuum loss

cleanserⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Cleanser

belongs to: cleanser ^c

constrain e11ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e11

belongs to: constrain e11 ^c
has facts: has value ^dp "false"^^boolean

constrain e12ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e12

belongs to: constrain e12 ^c
has facts: has value ^dp "true"^^boolean

constrain e13ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e13

belongs to: constrain e13 ^c
has facts: has value ^dp "true"^^boolean

constrain e21ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e21

belongs to: constrain e21 ^c
has facts: has value ^dp "true"^^boolean

constrain e22ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e22

belongs to: constrain e22 ^c
has facts: has value ^dp "false"^^boolean

constrain e23ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e23

belongs to: constrain e23 ^c
has facts: has value ^dp "true"^^boolean; has value ^dp "1"

constrain e31ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e31

belongs to: constrain e31 ^c
has facts: has value ^dp "true"^^boolean

constrain e32ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e32

belongs to: constrain e32 ^c
has facts: has value ^dp "true"^^boolean

constrain e33ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__constrain_e33

belongs to: constrain e33 ^c
has facts: has value ^dp "true"^^boolean

cubicⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__cubic

belongs to: cubic ^c
has facts: has value ^dp "1"

Cured Maximal Thermal Stability of Frekote 770-NCⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Cured_Thermal_Stability_of_Frekote_770-NC

belongs to: MaximalTemperature ^c
has facts: has unit ^op q25267

curing35 70ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Curing35-70

belongs to: Curingprocess with increasing temperature ^c
has facts: has characteristic ^op temperature increase diff; has characteristic ^op temperature increase time; has next ^op curing70°; executedBy ^op exampleoven

curing35°ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Curing35°

belongs to: Curingprocess with constant Temperature ^c
has facts: has characteristic ^op durationerster teilvom zyklus; has characteristic ^op start temperature; has next ^op curing35 70; executedBy ^op exampleoven

curing70°ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Curing70°

belongs to: Curingprocess with constant Temperature ^c
has facts: has characteristic ^op durationletzter teil vom zyklus; has characteristic ^op end termperature; has next ^op demolding process; executedBy ^op exampleoven; is final process or node ^dp "true"^^boolean

cut peel plyⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CutPeelPly

belongs to: cut peel ply ^c
has facts: has characteristic ^op length of peel ply; has characteristic ^op width of peel ply; has Input ^op __Aufbau1; has Input ^op peel ply; has next ^op layer peel ply; hasOutput ^op __Aufbau1

cut resin distribution mediaⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CutResinDistributionMedia

belongs to: cut resin distribution media ^c
has facts: has characteristic ^op length resin distribution media; has characteristic ^op width resin distribution media; has Input ^op __Aufbau1; has Input ^op resin distribution media; has next ^op layer resin distribution media; hasOutput ^op __Aufbau1

cut vacuum filmⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__CutVacuumFilm

belongs to: cut vacuum film ^c
has facts: has characteristic ^op length vacuum foil; has characteristic ^op width vacuum foil; has Input ^op __Aufbau1; has Input ^op vacuum film; has next ^op fixate vacuum film; hasOutput ^op __Aufbau1

degase matrixⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DegaseMatrix

belongs to: degase matrix ^c
has facts: has characteristic ^op degase matrix duration; has Input ^op matrix; has next ^op draw vacuum cast; hasOutput ^op matrix; uses vacuum pump mode ^op mode draw vacuum; executedBy ^op vacuum pump; is final process or node ^dp "true"^^boolean

degase matrix durationⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DegaseMatrixDuration

belongs to: duration ^c
has facts: has unit ^op q11574; has value ^dp "2100"^^integer

degasing nodeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DegasingNode

belongs to: Degasing Node ^c
has facts: has final process ^op degase matrix; has initial process ^op mix matrix; has next ^op infiltration node; executes ^op degase matrix; executes ^op mix matrix

demolding a kⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DemoldingAK

belongs to: demolding process ^c
has facts: hasOutput ^op a k v2 90 2; executedBy ^op examplehuman

demolding nodeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DemoldingNode

belongs to: Demolding Node ^c
has facts: has Input ^op __Aufbau1; hasOutput ^op component; executes ^op demolding process; is final process or node ^dp "true"^^boolean

demolding processⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DemoldingProcess

belongs to: demolding process ^c
has facts: has next ^op __PrepareGluePlate; executedBy ^op examplehuman

dist edgesⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__dist_edges

belongs to: dist edges ^c
has facts: has value ^dp "0.002"^^float

dist fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__dist_fibre

belongs to: dist fibre ^c
has facts: has Input ^op a k v2 90 2 probe; has value ^dp "0.001"^^float

dist fibre maxⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__dist_fibre_max

belongs to: dist fibre max ^c
has facts: has value ^dp "0.002"^^float

draw vacuumⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DrawVacuum

belongs to: run vacuum pump ^c
has facts: has characteristic ^op pressure after drawing vacuum; has next ^op check for vacuum loss; uses vacuum pump mode ^op mode draw vacuum

draw vacuum castⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DrawVacuumCast

belongs to: run vacuum pump ^c
has facts: has characteristic ^op duration; has characteristic ^op pressure after drawing vacuum; has Input ^op __Aufbau1; has Input ^op matrix; has next ^op draw vacuum sprue; hasOutput ^op __Aufbau1; uses vacuum pump mode ^op mode draw vacuum

draw vacuum sprueⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DrawVacuumSprue

belongs to: run vacuum pump ^c
has facts: has characteristic ^op duration; has characteristic ^op pressure after drawing vacuum; has Input ^op __Aufbau1; has next ^op increase pressure; uses vacuum pump mode ^op mode draw vacuum

durationⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Duration

belongs to: duration ^c
has facts: has unit ^op q11574; has value ^dp "1200"^^integer

durationerster teilvom zyklusⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DurationersterTeilvomZyklus

belongs to: duration ^c
has facts: has unit ^op q11574; has value ^dp "10800"^^integer

durationletzter teil vom zyklusⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__DurationletzterTeilVomZyklus

belongs to: duration ^c
has facts: has unit ^op q11574; has value ^dp "25200"^^integer

e11ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e11

belongs to: e11 ^c
has facts: has value ^dp "false"^^boolean

e12ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e12

belongs to: e12 ^c
has facts: has value ^dp "false"^^boolean

e13ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e13

belongs to: e13 ^c
has facts: has value ^dp "0.0"^^float

e21ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e21

belongs to: e21 ^c
has facts: has value ^dp "false"^^boolean

e22ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e22

belongs to: e22 ^c
has facts: has value ^dp "false"^^boolean

e23ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e23

belongs to: e23 ^c
has facts: has value ^dp "false"^^boolean

e31ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e31

belongs to: e31 ^c
has facts: has value ^dp "false"^^boolean

e32ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e32

belongs to: e32 ^c
has facts: has value ^dp "false"^^boolean

e33ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__e33

belongs to: e33 ^c
has facts: has value ^dp "0.025"^^float

end termperatureⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__EndTermperature

belongs to: temperature ^c
has facts: has unit ^op q25267; has value ^dp "70"^^integer

evaluation modeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__evaluation_mode

belongs to: evaluation mode ^c
has facts: has value ^dp "33.0"^^float

exampleovenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__exampleoven

belongs to: furnace ^c

f v cⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__FVC

belongs to: f v c ^c
has facts: has value ^dp "0.5"^^float

fibre compositeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__FibreComposite

has facts: composed of ^op matrix; composed of ^op short fibre

Final Curing Time of Frekote 770-NCⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Final_Curing_Time_of_Frekote_770-NC

belongs to: duration ^c
has facts: has unit ^op q11574

fix originⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__fix_origin

belongs to: fix origin ^c
has facts: has value ^dp "false"^^boolean

fixate vacuum filmⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__FixateVacuumFilm

belongs to: fixate vacuum film ^c
has facts: has Input ^op __Aufbau1; has next ^op run gas ballast; hasOutput ^op __Aufbau1; executedBy ^op examplehuman; is final process or node ^dp "true"^^boolean

Frekote 770 NCⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Frekote_770_NC

belongs to: release agent ^c
has facts: has characteristic ^op Cured Maximal Thermal Stability of Frekote 770-NC; has characteristic ^op Final Curing Time of Frekote 770-NC; has characteristic ^op Loctite; has characteristic ^op Maximal Application Temperature of Frekote 770-NC; has characteristic ^op __Minimal Application Temperature of Frekote 770-NC; has characteristic ^op Technichal Data Sheet: Frekote 770 NC

gas ballast durationⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__GasBallastDuration

belongs to: duration ^c
has facts: has unit ^op q11574

gersterbandⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Gersterband

belongs to: gerster band ^c

glue tacky tapeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__GlueTackyTape

belongs to: glue tacky tape ^c
has facts: has Input ^op __Aufbau1; has Input ^op tacky tape; has next ^op place p t f e hose; hasOutput ^op __Aufbau1; executedBy ^op examplehuman

hardenerⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Hardener

belongs to: matrix hardener ^c
has facts: has characteristic ^op weight hardener

increase pressureⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__IncreasePressure

belongs to: increase pressure ^c
has facts: has characteristic ^op pressure after increase; has next ^op curing35°; executedBy ^op vacuum pump; is final process or node ^dp "true"^^boolean

infiltration nodeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__InfiltrationNode

belongs to: Infiltration Node ^c
has facts: has final process ^op increase pressure; has initial process ^op draw vacuum cast; has next ^op Oven; executes ^op draw vacuum cast; executes ^op draw vacuum sprue; executes ^op increase pressure

interfacesizeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__interfacesize

belongs to: interfacesize ^c
has facts: has value ^dp "1.0E-4"^^float

layer fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__LayerFibre

belongs to: layer fibre ^c
has facts: has characteristic ^op number of layers; has Input ^op __Aufbau1; has next ^op cut peel ply; hasOutput ^op __Aufbau1; executedBy ^op examplehuman; has layering direction ^dp "90°"

layer peel plyⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__LayerPeelPly

belongs to: layer peel ply ^c
has facts: has Input ^op __Aufbau1; has next ^op cut resin distribution media; hasOutput ^op __Aufbau1; has previous ^op cut peel ply; executedBy ^op examplehuman

layer resin distribution mediaⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__LayerResinDistributionMedia

belongs to: layer resin distribution media ^c
has facts: has Input ^op __Aufbau1; has next ^op glue tacky tape; hasOutput ^op __Aufbau1; executedBy ^op examplehuman

length of long fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__LengthOfLongFibre

belongs to: length ^c
has facts: has unit ^op q174728

length of peel plyⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__LengthOfPeelPly

belongs to: length ^c
has facts: has unit ^op q174728

length resin distribution mediaⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__LengthResinDistributionMedia

belongs to: length ^c
has facts: has unit ^op q174728

length vacuum foilⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__LengthVacuumFoil

belongs to: length ^c
has facts: has unit ^op q174728

Loctiteⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Loctite

belongs to: manufacturer ^c

LongFibre ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#LongFibre

belongs to: carbon ^c; LongFibre ^c
is disjoint with: short fibre
has facts: has fibre length ^op LongFibre; has fibre length long fibre ^dp "true"^^boolean
is also defined as: class

m p c 1ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__MPC_1

belongs to: m p c 1 ^c
has facts: has value ^dp "false"^^boolean

m p c 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__MPC_2

belongs to: m p c 2 ^c
has facts: has value ^dp "false"^^boolean

m p c 3ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__MPC_3

belongs to: m p c 3 ^c
has facts: has value ^dp "false"^^boolean

manner of break a k v2 90 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__MannerOfBreakAK_V2_90_2

belongs to: manner of break ^c
has facts: has value ^dp "centerish, closer to tab"

manufacturerⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Manufacturer

belongs to: manufacturer ^c
has facts: is manufacturer of ^op hardener; is manufacturer of ^op resin

matrixⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Matrix

has facts: has characteristic ^op 1:10 ratio; composed of ^op hardener; composed of ^op resin

matrixt ratioⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__MatrixtRatio

belongs to: hardener to resin ratio ^c
has facts: has unit ^op q199; has value ^dp "0,3"

max attemptsⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__max_attempts

belongs to: max attempts ^c
has facts: has value ^dp "50"^^int

max iterⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__max_iter

belongs to: max iter ^c
has facts: has value ^dp "3000"^^int

Maximal Application Temperature of Frekote 770-NCⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Maximal_Application_Temperature_of_Frekote_770-NC

belongs to: MaximalTemperature ^c
has facts: has unit ^op q25267

megapascalⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#megapascal

belongs to: p m d si unit ^c
is same as: q21062777

meshsizefracⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__meshsizefrac

belongs to: meshsizefrac ^c
has facts: has value ^dp "20.0"^^float

millibarⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#millibar

belongs to: p m d si unit ^c
is same as: q3495543

mix matrixⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__MixMatrix

belongs to: mix matrix ^c
has facts: has characteristic ^op matrixt ratio; has Input ^op hardener; has Input ^op resin; has next ^op degase matrix; hasOutput ^op matrix

modeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__mode

possible modes {"11";"12";"13";"22";"23";"33"} should be the same as evaluation mode in step 7

belongs to: mode ^c
has facts: has value ^dp "33.0"^^float

mode draw vacuumⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#ModeDrawVacuum

belongs to: vacuum machine mode ^c

mode gas ballastⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#ModeGasBallast

belongs to: vacuum machine mode ^c

mode reduce vacuumⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#ModeReduceVacuum

belongs to: vacuum machine mode ^c

mu eⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__mu_E

belongs to: mu e ^c
has facts: has value ^dp "70000.0"^^float

mu fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__mu_fibre

belongs to: mu fibre ^c
has facts: has value ^dp "0.016"^^float

n fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__n_fibre

belongs to: n fibre ^c
has facts: has value ^dp "10"^^int

nopopupⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__nopopup

belongs to: nopopup ^c
has facts: has value ^dp "true"^^boolean

number of layersⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__NumberOfLayers

belongs to: number ^c
has facts: has unit ^op q199

Ovenⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Oven

belongs to: furnace ^c
has facts: has final process ^op curing70°; has initial process ^op curing35°; has Input ^op __Aufbau1; has next ^op demolding node; hasOutput ^op __Aufbau1; executes ^op curing35 70; executes ^op curing35°; executes ^op curing70°

p b c algorithmⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PBC_algorithm

belongs to: p b c algorithm ^c
has facts: has value ^dp "PBLCC"

p t f e hoseⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PTFEHose

belongs to: p t f e hose ^c
has facts: has characteristic ^op manufacturer

peel plyⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PeelPly

belongs to: peel ply ^c
has facts: has characteristic ^op manufacturer

place p t f e hoseⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PlacePTFEHose

belongs to: place p t f e hose ^c
has facts: has Input ^op __Aufbau1; has Input ^op gersterband; has next ^op cut vacuum film; hasOutput ^op __Aufbau1; has offset sprue and cast ^dp "true"^^boolean

plot r v eⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__plotRVE

belongs to: plot r v e ^c
has facts: has value ^dp "false"^^boolean

poisson of a k v2 90 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PoissonOfAK_V2_90_2

belongs to: poisson's ratio ^c
has facts: has unit ^op megapascal; has value ^dp "0.13"^^decimal

pressure after drawing vacuumⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PressureAfterDrawingVacuum

belongs to: exact pressure ^c
has facts: has unit ^op millibar; has value ^dp "2"^^integer

pressure after increaseⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__PressureAfterIncrease

belongs to: exact pressure ^c
has facts: has unit ^op millibar; has value ^dp "400"^^integer

production processⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__ProductionProcess

belongs to: Plate Production Processing Node ^c
has facts: has initial process ^op __CleansingGlassPlate

Profilform NREL 5MW 15pⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#NREL5MW15p

belongs to: profile form ^c

q199ⁿⁱ back to ToC or Named Individual ToC

IRI: https://material-digital.de/pmdco/Q199

has facts: has unit ^op q199

q3495543ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#Q3495543

belongs to: p m d si unit ^c
is same as: millibar

refmeshsizefracⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__refmeshsizefrac

belongs to: refmeshsizefrac ^c
has facts: has value ^dp "20.0"^^float

resinⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Resin

belongs to: resin ^c
has facts: has characteristic ^op weight of resin

resin distribution mediaⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__ResinDistributionMedia

belongs to: resin distribution media ^c
has facts: has characteristic ^op manufacturer

run evaluationⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__run_evaluation

belongs to: run evaluation ^c
has facts: has value ^dp "true"^^boolean

run gas ballastⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__RunGasBallast

belongs to: run vacuum pump ^c
has facts: has characteristic ^op mode gas ballast; has Input ^op __Aufbau1; has next ^op draw vacuum; hasOutput ^op __Aufbau1

run simulationⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__run_simulation

belongs to: run simulation ^c
has facts: has value ^dp "true"^^boolean

scalingⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__scaling

belongs to: scaling ^c
has facts: has value ^dp "1.0"^^float

short fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__ShortFibre

belongs to: short fibre ^c
has facts: has fibre length ^op short fibre; has fibre length long fibre ^dp "false"^^boolean

sigma eⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__sigma_E

belongs to: sigma e ^c
has facts: has value ^dp "800.0"^^float

sigma fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__sigma_fibre

belongs to: sigma fibre ^c
has facts: has value ^dp "0.0"^^float

simulation of endless fibre reinforced materialⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__SimulationOfEndlessFibreReinforcedMaterial

belongs to: simulation node ^c
has facts: has final process ^op step7; has initial process ^op step1; has Input ^op component; hasOutput ^op __SimulationErgebnis; executes ^op step1; executes ^op step2; executes ^op step3; executes ^op step4; executes ^op step5; executes ^op step6; executes ^op step7

start temperatureⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__StartTemperature

belongs to: temperature ^c
has facts: has unit ^op q25267; has value ^dp "35"^^integer

step1ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Step1

belongs to: step1 ^c
has facts: has Input ^op f v c; has Input ^op dist edges; has Input ^op dist fibre; has Input ^op dist fibre max; has Input ^op max attempts; has Input ^op max iter; has Input ^op mu fibre; has Input ^op n fibre; has Input ^op plot r v e; has Input ^op scaling; has Input ^op sigma fibre; has next ^op step2; is final process or node ^dp "false"^^boolean; is initial process or node ^dp "true"^^boolean

step2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Step2

belongs to: step2 ^c
has facts: has Input ^op cubic; has Input ^op interfacesize; has Input ^op meshsizefrac; has Input ^op nopopup; has Input ^op refmeshsizefrac; has next ^op step3; is final process or node ^dp "false"^^boolean; is initial process or node ^dp "false"^^boolean

step3ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Step3

belongs to: step3 ^c
has facts: has Input ^op a sigma ult; has Input ^op mu e; has Input ^op sigma e; has next ^op step4; is final process or node ^dp "false"^^boolean; is initial process or node ^dp "false"^^boolean

step4ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Step4

belongs to: step4 ^c
has facts: has Input ^op p b c algorithm; has Input ^op constrain e11; has Input ^op constrain e12; has Input ^op constrain e13; has Input ^op constrain e21; has Input ^op constrain e22; has Input ^op constrain e23; has Input ^op constrain e31; has Input ^op constrain e32; has Input ^op constrain e33; has Input ^op e11; has Input ^op e12; has Input ^op e13; has Input ^op e21; has Input ^op e22; has Input ^op e23; has Input ^op e31; has Input ^op e32; has Input ^op e33; has Input ^op fix origin; has Input ^op mode; has next ^op step5; is final process or node ^dp "false"^^boolean; is initial process or node ^dp "false"^^boolean

step5ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Step5

belongs to: step5 ^c
has facts: has Input ^op m p c 1; has Input ^op m p c 2; has Input ^op m p c 3; has next ^op step6; is final process or node ^dp "false"^^boolean; is initial process or node ^dp "false"^^boolean

step6ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Step6

belongs to: step6 ^c
has facts: has Input ^op run simulation; has next ^op step7; is final process or node ^dp "false"^^boolean; is initial process or node ^dp "false"^^boolean

step7ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Step7

belongs to: step7 ^c
has facts: has Input ^op evaluation mode; has Input ^op run evaluation; is final process or node ^dp "true"^^boolean; is initial process or node ^dp "false"^^boolean

strain a k v2 90 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__StrainAK_V2_90_2

belongs to: strain at u t s ^c
has facts: has unit ^op q199; has value ^dp "0.30"^^decimal

t t a k v2 90 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__TT_AK_V2_90_2

belongs to: Static Tensile Test ^c
has facts: has Input ^op a k v2 90 2 probe; hasOutput ^op manner of break a k v2 90 2; hasOutput ^op poisson of a k v2 90 2; hasOutput ^op strain a k v2 90 2; hasOutput ^op tensile strength a k v2 90 2; hasOutput ^op young a k v2 90 2

tacky tapeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__TackyTape

belongs to: tacky tape ^c
has facts: has characteristic ^op manufacturer

Technichal Data Sheet: Frekote 770 NCⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__Technichal_Data_Sheet:_Frekote_770_NC

belongs to: TechnicalDataSheet ^c
has facts: has resource location ^dp "https://syncandshare.lrz.de/download/MlZvRnNjWjhGNmFORnNQUTg1OTdX/08_Ontologies/01_Inputs_Ontology/DataSheets/td_de_1loc0770.pdf?inline"^^any u r i

temperature increase diffⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__TemperatureIncreaseDiff

belongs to: temperature ^c
has facts: has unit ^op q69362731; has value ^dp "35"^^integer

temperature increase timeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__TemperatureIncreaseTime

belongs to: duration ^c
has facts: has unit ^op q11574; has value ^dp "3600"^^integer

tensile strength a k v2 90 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__TensileStrengthAK_V2_90_2

belongs to: ult. tensile strength ^c
has facts: has unit ^op megapascal; has value ^dp "38"^^integer

universal prüfmaschine inspekt table100k nⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#UniversalPrüfmaschineInspektTable100kN

belongs to: universal testing machine ^c
has facts: executes ^op t t a k v2 90 2

vacuum filmⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__VacuumFilm

belongs to: vacuum film ^c

vacuum lossⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__VacuumLoss

belongs to: pressure difference ^c
has facts: has unit ^op millibar; has value ^dp "5"^^integer

vacuum pumpⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__VacuumPump

belongs to: Leakage Test Node ^c; vacuum pump ^c
has facts: has final process ^op check for vacuum loss; has initial process ^op run gas ballast; has Input ^op __Aufbau1; has next ^op degasing node; hasOutput ^op __Aufbau1; has vacuum pump ^op vacuum pump; executes ^op check for vacuum loss; executes ^op draw vacuum; executes ^op run gas ballast

vorbereitung a k v2 90 2 probeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__VorbereitungAK_V2_90_2Probe

belongs to: Preparing specimen process ^c

waiting timeⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WaitingTime

belongs to: waiting time ^c

weight hardenerⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WeightHardener

belongs to: weight ^c
has facts: has unit ^op q41803; has value ^dp "120"^^integer

weight of resinⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WeightOfResin

belongs to: weight ^c
has facts: has unit ^op q41803; has value ^dp "400"^^integer

width of long fibreⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WidthOfLongFibre

belongs to: width ^c
has facts: has unit ^op q174728

width of peel plyⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WidthOfPeelPly

belongs to: width ^c
has facts: has unit ^op q174728

width resin distribution mediaⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WidthResinDistributionMedia

belongs to: width ^c
has facts: has unit ^op q174728

width vacuum foilⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__WidthVacuumFoil

belongs to: width ^c
has facts: has unit ^op q174728

windradflügelⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#Windradflügel

belongs to: component
has facts: has characteristic ^op Profilform NREL 5MW 15p

young a k v2 90 2ⁿⁱ back to ToC or Named Individual ToC

IRI: http://w3id.org/sensotwin/applicationontology#__YoungAK_V2_90_2

belongs to: young's modulus ^c
has facts: has unit ^op megapascal; has value ^dp "13221"^^integer

Legend back to ToC

^c: Classes
^op: Object Properties
^dp: Data Properties
ⁿⁱ: Named Individuals

Acknowledgments back to ToC

The authors would like to thank Silvio Peroni for developing LODE, a Live OWL Documentation Environment, which is used for representing the Cross Referencing Section of this document and Daniel Garijo for developing Widoco, the program used to create the template used in this documentation.

SensoTwin Application Ontology

Release 19.01.2024

Abstract

SensoTwin Application Ontology: Overview back to ToC

Classes

Object Properties

Data Properties

Annotation Properties

Named Individuals

Cross-reference for SensoTwin Application Ontology classes, object properties and data properties back to ToC

Classes

a sigma ultc back to ToC or Class ToC

Activityc back to ToC or Class ToC

Agentc back to ToC or Class ToC

analysing processc back to ToC or Class ToC

applying release agentc back to ToC or Class ToC

assembling processc back to ToC or Class ToC

Auxiliary Materialc back to ToC or Class ToC

b sigma ultc back to ToC or Class ToC

Binderc back to ToC or Class ToC

carbonc back to ToC or Class ToC

check vacuum lossc back to ToC or Class ToC

cleanserc back to ToC or Class ToC

cleansing glass platec back to ToC or Class ToC

constrain e11c back to ToC or Class ToC

constrain e12c back to ToC or Class ToC

constrain e13c back to ToC or Class ToC

constrain e21c back to ToC or Class ToC

constrain e22c back to ToC or Class ToC

constrain e23c back to ToC or Class ToC

constrain e31c back to ToC or Class ToC

constrain e32c back to ToC or Class ToC

constrain e33c back to ToC or Class ToC

cubicc back to ToC or Class ToC

Curing Processc back to ToC or Class ToC

Curingprocess with constant Temperaturec back to ToC or Class ToC

Curingprocess with decreasing Temperaturec back to ToC or Class ToC

Curingprocess with increasing temperaturec back to ToC or Class ToC

cut fibrec back to ToC or Class ToC

cut gersterbandc back to ToC or Class ToC

cut peel plyc back to ToC or Class ToC

cut resin distribution mediac back to ToC or Class ToC

cut vacuum filmc back to ToC or Class ToC

Cutting specimen processc back to ToC or Class ToC

Cylic Tensile Testc back to ToC or Class ToC

data resourcec back to ToC or Class ToC

degase matrixc back to ToC or Class ToC

Degasing Nodec back to ToC or Class ToC

degasing processc back to ToC or Class ToC

Demolding Nodec back to ToC or Class ToC

demolding processc back to ToC or Class ToC

dilatometerc back to ToC or Class ToC

dimensionsc back to ToC or Class ToC

dist edgesc back to ToC or Class ToC

dist fibrec back to ToC or Class ToC

dist fibre maxc back to ToC or Class ToC

DSCc back to ToC or Class ToC

durationc back to ToC or Class ToC

Dynamic Mechanic Analysisc back to ToC or Class ToC

e11c back to ToC or Class ToC

e12c back to ToC or Class ToC

e13c back to ToC or Class ToC

e21c back to ToC or Class ToC

e22c back to ToC or Class ToC

e23c back to ToC or Class ToC

e31c back to ToC or Class ToC

e32c back to ToC or Class ToC

e33c back to ToC or Class ToC

end temperaturec back to ToC or Class ToC

end timec back to ToC or Class ToC

endless fibrec back to ToC or Class ToC

endless fibre reinforced materialc back to ToC or Class ToC

Entityc back to ToC or Class ToC

evaluation modec back to ToC or Class ToC

exact pressurec back to ToC or Class ToC

ExactTemperaturec back to ToC or Class ToC

f v cc back to ToC or Class ToC

fibre compositec back to ToC or Class ToC

fibre lengthc back to ToC or Class ToC

fibre materialc back to ToC or Class ToC

a sigma ult^c back to ToC or Class ToC

Activity^c back to ToC or Class ToC

Agent^c back to ToC or Class ToC

analysing process^c back to ToC or Class ToC

applying release agent^c back to ToC or Class ToC

assembling process^c back to ToC or Class ToC

Auxiliary Material^c back to ToC or Class ToC

b sigma ult^c back to ToC or Class ToC

Binder^c back to ToC or Class ToC

carbon^c back to ToC or Class ToC

check vacuum loss^c back to ToC or Class ToC

cleanser^c back to ToC or Class ToC

cleansing glass plate^c back to ToC or Class ToC

constrain e11^c back to ToC or Class ToC

constrain e12^c back to ToC or Class ToC

constrain e13^c back to ToC or Class ToC

constrain e21^c back to ToC or Class ToC

constrain e22^c back to ToC or Class ToC

constrain e23^c back to ToC or Class ToC

constrain e31^c back to ToC or Class ToC

constrain e32^c back to ToC or Class ToC

constrain e33^c back to ToC or Class ToC

cubic^c back to ToC or Class ToC

Curing Process^c back to ToC or Class ToC

Curingprocess with constant Temperature^c back to ToC or Class ToC

Curingprocess with decreasing Temperature^c back to ToC or Class ToC

Curingprocess with increasing temperature^c back to ToC or Class ToC

cut fibre^c back to ToC or Class ToC

cut gersterband^c back to ToC or Class ToC

cut peel ply^c back to ToC or Class ToC

cut resin distribution media^c back to ToC or Class ToC

cut vacuum film^c back to ToC or Class ToC

Cutting specimen process^c back to ToC or Class ToC

Cylic Tensile Test^c back to ToC or Class ToC

data resource^c back to ToC or Class ToC

degase matrix^c back to ToC or Class ToC

Degasing Node^c back to ToC or Class ToC

degasing process^c back to ToC or Class ToC

Demolding Node^c back to ToC or Class ToC

demolding process^c back to ToC or Class ToC

dilatometer^c back to ToC or Class ToC

dimensions^c back to ToC or Class ToC

dist edges^c back to ToC or Class ToC

dist fibre^c back to ToC or Class ToC

dist fibre max^c back to ToC or Class ToC

DSC^c back to ToC or Class ToC

duration^c back to ToC or Class ToC

Dynamic Mechanic Analysis^c back to ToC or Class ToC

e11^c back to ToC or Class ToC

e12^c back to ToC or Class ToC

e13^c back to ToC or Class ToC

e21^c back to ToC or Class ToC

e22^c back to ToC or Class ToC

e23^c back to ToC or Class ToC

e31^c back to ToC or Class ToC

e32^c back to ToC or Class ToC

e33^c back to ToC or Class ToC

end temperature^c back to ToC or Class ToC

end time^c back to ToC or Class ToC

endless fibre^c back to ToC or Class ToC

endless fibre reinforced material^c back to ToC or Class ToC

Entity^c back to ToC or Class ToC

evaluation mode^c back to ToC or Class ToC

exact pressure^c back to ToC or Class ToC

ExactTemperature^c back to ToC or Class ToC

f v c^c back to ToC or Class ToC

fibre composite^c back to ToC or Class ToC

fibre length^c back to ToC or Class ToC

fibre material^c back to ToC or Class ToC

Finaler Prozess^c back to ToC or Class ToC

fix origin^c back to ToC or Class ToC

fixate vacuum film^c back to ToC or Class ToC

Fixating glueplatetool process^c back to ToC or Class ToC

Flashtape^c back to ToC or Class ToC

furnace^c back to ToC or Class ToC

gerster band^c back to ToC or Class ToC

glass^c back to ToC or Class ToC

Glue^c back to ToC or Class ToC

glue tacky tape^c back to ToC or Class ToC

GlueHardener^c back to ToC or Class ToC